联系方式   Contact

TSCHAN联轴器TNM H同驰联轴器

更新:2019-3-22 14:49:27      点击:
  • 产品品牌   TSCHAN
  • 产品型号   TSCHAN® TNM H
  • 产品描述

    TSCHAN® TNM H联轴器...

产品介绍

多件式设计,可单独移除中间节,无需轴向移动工作端组件即可拆卸泵轮。
图例说明 · Dimensions


中间节采用灰铸铁材料
法兰毂为钢制,自尺寸148以上为球墨铸铁材料
中间弹性体:标准硬度Pb72, 高硬度Pb82
传安 TSCHAN® Nor-Mex® H

TKNPb72 = 公称传输扭矩(采用Pb72弹性体联轴器)
Coupling nominal torque by using the elastic element from Pb72
TKNPb82 = 公称传输扭矩(采用Pb82弹性体联轴器)
Coupling nominal torque by using the elastic element from Pb82
nmax = 最大转速/Max. rotation speed
d1kmax = d1的最大孔径(DIN 6885-1标准键槽)
Max. bore diameter d1 with keyway acc. to DIN 6885-1
d2kmax = d2的最大孔径(DIN 6885-1标准键槽)

Max. bore diameter d2 with keyway acc. to DIN 6885-1
D1= 联接毂外径/Outer diameter hub
D2= 联接毂外径/Outer diameter hub
C1= 联接毂孔导入长度/Guided length in hub boring

图例说明 · Dimensions
Intermediate spacer in grey cast iron
Flange hub in steel, from size 148 up in grey cast iron
Elastic intermediate ring in different hardnesses: standard Pb72, hard Pb82
传安 TSCHAN® Nor-Mex® H
下页续 · To continue see next page
L= 总长度/Total length
L2= 毂阶长度/Length on the hub
LD= 中间单节长度/Spacer length
LE= 中间单节长度/Spacer length
E= 左右件间距
Gap width between left and right component
FE= 间距E的公差/Tolerance of the gap width E
EE= 联接毂内间距/Distance of the hubs
GwZW= 中间节重量/Spacer weight
Gwub= 总重量(未开孔)/Weight, unbored

更多产品